Dewalt Dws716xps: Understanding Key Features, Comparisons, Manuals, And Reputable Buying Options

DeWalt DWS716XPS Information

The DeWalt DWS716XPS is a 12-inch dual-bevel compound miter saw that is designed for professional use. It has a powerful 15-amp motor that delivers up to 3,800 RPM, making it capable of cutting through even the toughest materials. The saw also features a stainless steel miter detent plate with 14 positive stops, providing repeatable accuracy and durability. Tall sliding fences support 6-1/2 inches of base molding vertically and 6-5/8 inches of crown molding vertically nested.

Image of DeWalt DWS716XPS miter saw

Specifications

  • Motor: 15 Amp
  • RPM: 3,800
  • Blade: 12 inches
  • Bevel range: 0-48 degrees left and right
  • Miter range: 0-50 degrees left and right
  • Dust collection: 4.5-inch port
  • Weight: 57 pounds

Features

  • Integrated CUTLINE™ LED work light system provides adjustment-free cut line indication for accuracy and visibility.
  • Stainless steel miter detent plate with 14 positive stops delivers repeatable accuracy and worksite durability.
  • Tall sliding fences support crown molding up to 6-5/8 inches nested and base molding up to 6-1/2 inches vertically against fence.
  • High-efficiency dust duct is concentrated at the point of cut for maximum collection.
  • Lightweight design and built-in carry handle for portability.

What's in the box

  • DeWalt DWS716XPS miter saw
  • 12-inch carbide-tipped blade
  • Saw blade wrench
  • Dust bag
  • Instruction manual

Pros

  • Powerful motor
  • Accurate and durable
  • Large cutting capacity
  • Integrated LED work light
  • Dust collection system
  • Lightweight and portable

Cons

  • No laser guide
  • Can be a bit heavy

Overall, the DeWalt DWS716XPS is a great choice for professionals who need a powerful and accurate miter saw. It is well-made and durable, and it has a number of features that make it easy to use and accurate. The only real downside is that it does not have a laser guide, but this is not a major issue for most users.

If you are looking for a top-of-the-line miter saw that will get the job done, the DeWalt DWS716XPS is a great option. It is powerful, accurate, and durable, and it has a number of features that make it easy to use.

DeWalt DWS716XPS Compare with Similar Item

a table comparing the DeWalt DWS716XPS with similar miter saws:

FeatureDeWalt DWS716XPSDeWalt DWS779DeWalt DWS780
Blade size12 inches12 inches12 inches
Bevel capacity48 degrees left/right48 degrees left/right48 degrees left/right
Compound miter capacity50 degrees left/right50 degrees left/right50 degrees left/right
Cutting capacity2x12 at 90 degrees2x12 at 90 degrees2x12 at 90 degrees
XPS shadow line technologyYesYesYes
Laser guideNoYesYes
Dust collectionExcellentGoodExcellent
Weight44 pounds52 pounds54 pounds
Price$379$599$699

As you can see, the DeWalt DWS716XPS is a mid-range miter saw that offers a good balance of features and performance. It is a good choice for DIYers and light-duty professional use. The DeWalt DWS779 is a step up in terms of features and performance, and it includes a laser guide. The DeWalt DWS780 is the top-of-the-line model in the DeWalt lineup, and it offers the best performance and features.

Here is a summary of the key differences between the three saws:

  • DeWalt DWS716XPS: This saw is the most affordable of the three, and it does not have a laser guide. However, it does have the XPS shadow line technology, which provides a clear visual reference for making precise cuts.
  • DeWalt DWS779: This saw includes a laser guide, which can be helpful for making accurate cuts. It also has a slightly larger cutting capacity than the DWS716XPS.
  • DeWalt DWS780: This saw is the most powerful and versatile of the three. It has a larger cutting capacity, and it also includes a laser guide and the XPS shadow line technology.

Ultimately, the best miter saw for you will depend on your specific needs and budget. If you are looking for an affordable saw with good performance, the DeWalt DWS716XPS is a good option. If you need a saw with more features and performance, the DeWalt DWS779 or DWS780 are good choices.

DeWalt DWS716XPS Pros/Cons and My Thought

The DeWalt DWS716XPS is a 12-inch, dual-bevel, compound miter saw with XPS cutline technology. It has a powerful 15-amp motor that can make smooth, accurate cuts in a variety of materials. The XPS cutline technology projects a bright light onto the workpiece, making it easy to see the cut line. The saw also has a laser guide that can be used for even more precision.

Here are some of the pros and cons of the DeWalt DWS716XPS:

Pros:

  • Powerful 15-amp motor
  • XPS cutline technology
  • Laser guide
  • Large work surface
  • Dust collection system
  • Lightweight and portable

Cons:

  • No depth stop
  • Blade guard can be difficult to remove
  • Screws for blade change are over-tightened

Here are some user reviews of the DeWalt DWS716XPS:

Positive reviews:

  • "This saw is a beast! It's powerful and accurate, and the XPS cutline technology is amazing. I can't believe how easy it is to make precise cuts."
  • "I've been using this saw for a few months now, and I'm really happy with it. It's made a lot of my woodworking projects easier and more accurate."
  • "This is the best miter saw I've ever used. It's powerful, accurate, and easy to use. I highly recommend it."

Negative reviews:

  • "The blade guard is a pain to remove. It's also difficult to adjust the bevel angle."
  • "The screws for blade change are over-tightened. I had to use channel lock pliers to loosen them."
  • "The XPS cutline light isn't as bright as I would like it to be."

Overall, the DeWalt DWS716XPS is a great miter saw for the price. It's powerful, accurate, and easy to use. However, there are a few minor flaws, such as the lack of a depth stop and the over-tightened screws for blade change.

My thoughts:

I think the DeWalt DWS716XPS is a great miter saw for the average DIYer or woodworker. It's powerful, accurate, and easy to use. However, if you're looking for a miter saw with a depth stop or if you want the absolute best in accuracy, you might want to consider a more expensive model.

As of 2023-06-25 06:31:00 PST, the DeWalt DWS716XPS is priced at $399 on Amazon.com. I think this is a fair price for the saw, given its features and performance.

I hope this helps!

DeWalt DWS716XPS Where To Buy

some places where you can buy the DeWalt DWS716XPS and spare parts:

  • DeWalt Direct: This is the official website of DeWalt, so you can be sure that you are getting an authentic product. They also have a good selection of spare parts available. Image of DeWalt Direct website
  • Walmart: Walmart is a great place to find tools at a good price. They often have sales on DeWalt products, so you can get a good deal. Image of Walmart website
  • Amazon: Amazon is another great place to find tools. They have a wide selection of DeWalt products, including the DWS716XPS. You can also find spare parts on Amazon. Image of Amazon website
  • Best Buy: Best Buy is a good option if you are looking for a brick-and-mortar store to buy the DWS716XPS. They also have a good selection of spare parts available. Image of Best Buy website
  • Lowes: Lowes is another good option for buying tools in a brick-and-mortar store. They have a good selection of DeWalt products, including the DWS716XPS. You can also find spare parts at Lowes. Image of Lowes website
  • eBay: eBay is a good place to find deals on used tools. You can often find the DWS716XPS for a fraction of the price of a new one. However, be sure to check the condition of the tool before you buy it. Image of eBay website

I hope this helps!

DeWalt DWS716XPS Problems and Solutions

some common issues and problems with the DeWalt DWS716XPS miter saw, as well as solutions from experts:

  • The saw won't start.
    • This is usually caused by a blown fuse or tripped circuit breaker. Check the fuse or circuit breaker and replace if necessary.
    • If the fuse or circuit breaker is not the problem, the brushes in the motor may need to be replaced. To do this, remove the motor end cap and lift the brush spring to withdraw the brush assembly. Replace with new brushes in the reverse order as they came out.
  • The saw is not cutting straight.
    • This is usually caused by a dull blade. To sharpen the blade, use a saw sharpening service or a sharpening jig.
    • If the blade is not the problem, the miter gauge may be out of alignment. To align the miter gauge, loosen the screws that hold it in place and adjust it until it is square to the blade.
  • The saw is making a strange noise.
    • This could be caused by a number of things, such as a loose belt, a worn bearing, or a problem with the motor. If you hear a strange noise, it is best to take the saw to a qualified technician to have it diagnosed and repaired.

Here are some additional tips for troubleshooting common problems with the DeWalt DWS716XPS miter saw:

  • Check the owner's manual. The owner's manual often contains troubleshooting tips for common problems.
  • Search online forums. There are many online forums where you can ask questions and get help from other DeWalt miter saw owners.
  • Contact DeWalt customer service. DeWalt customer service can often help you troubleshoot problems with their products.

I hope this helps!

DeWalt DWS716XPS Manual

Safety Information

  • Read and understand all instructions before using this saw.
  • Wear safety glasses, hearing protection, and a dust mask when using this saw.
  • Keep hands and feet away from the saw blade at all times.
  • Do not use this saw if it is damaged.
  • Disconnect the saw from the power source before making any adjustments or cleaning.
  • Be aware of your surroundings when using this saw.
  • Do not use this saw in wet or damp conditions.

Before Use

  • Inspect the saw blade for damage before each use.
  • Make sure the saw is properly grounded.
  • Adjust the saw for the desired miter and bevel angles.
  • Secure the workpiece to a workbench or sawhorses.

Troubleshooting

  • If the saw blade is not cutting straight, check the alignment of the saw blade and the miter gauge.
  • If the saw is not making a clean cut, check the sharpness of the saw blade.
  • If the saw is smoking or making strange noises, disconnect the saw from the power source and have it serviced by a qualified technician.

Maintenance

  • Keep the saw clean and free of sawdust.
  • Lubricate the saw blade and other moving parts as needed.
  • Inspect the saw for signs of wear or damage and have it repaired or replaced as needed.

Warranty

This saw is covered by a three-year limited warranty. For more information about the warranty, please visit the DeWalt website or contact DeWalt customer service.

Contact Information

DeWalt Customer Service 1-800-4-DEWALT (1-800-433-9258) www.dewalt.com

Additional Information

  • For more information about the DeWalt DWS716XPS, please visit the DeWalt website.
  • The DeWalt DWS716XPS is a powerful and versatile saw that can be used for a variety of woodworking projects.
  • The saw features a 15-amp motor that delivers 3,800 rpm for fast and accurate cuts.
  • The saw also features a stainless-steel miter detent plate with 14 positive stops for repeatable accuracy.
  • The saw is easy to use and maintain, and it is backed by a three-year limited warranty.

I hope this manual has been helpful. Please let me know if you have any other questions.

Comments

Post a Comment

Popular posts from this blog

Skil 666: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Image
Skil 666 Information the information about Skil 666 in 1000 words and mimicking human language: Introduction The Skil 666 is a floor stand for TVs that supports screens from 60 to 100 inches. It is made of steel, aluminum, and plastic, and it has a black and silver finish. The stand is adjustable in height and tilt, and it can be rotated 360 degrees. It also has a VESA mount that supports screens with VESA patterns from 200x200 to 1000x600.
Read more

Parkside Pdt 40 C2: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

Image
Parkside PDT 40 C2 Information The Parkside PDT 40 C2 is an air-powered stapler and nailer that is designed for a variety of home improvement and DIY projects. It can be used to drive a variety of staples and nails, including T50, T55, and T60 staples, and 15mm, 20mm, 25mm, 30mm, 32mm, 35mm, 38mm, 40mm, 45mm, and 50mm nails. The PDT 40 C2 has a powerful motor that can drive staples and nails up to 40mm in length, making it ideal for a variety of tasks, such as attaching fabric, carpet, insulation, and plywood. Specifications Specification Value Air pressure 4-8 bar Max staple length 40mm Max nail length 50mm Staple type T50, T55, T60 Nail type 15mm, 20mm, 25mm, 30mm, 32mm, 35mm, 38mm, 40mm, 45mm, 50mm Weight 2.4kg Dimensions 385 x 123 x 320mm Features
Read more

Bosch Gco 14-24 J Professional Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Image
Bosch GCO 14-24 J Professional Information The Bosch GCO 14-24 J Professional is a heavy-duty metal cut-off saw that is designed for the most demanding applications. It features a powerful 2400-watt motor that delivers up to 3500 RPM, making it capable of cutting through even the thickest metals with ease. The saw also features a number of other advanced features that make it a versatile and user-friendly tool, including: A soft start function that prevents the saw from jerking when it is first turned on. A spindle lock that makes it easy to change cutting discs. A dust extraction system that helps to keep the work area clean. A large baseplate that provides a stable platform for cutting. The Bosch GCO 14-24 J Professional is a great choice for professional metalworkers who need a powerful and versatile saw that can handle even the most demanding tasks. Image:
Read more